Drawer Slides brought to you by CabinetWare

Home Page > Tools > Amana

We are proud to offer routing, drilling, and boring bits & assemblies by Amana Tools. Amana supplies a massive variety of bits for woodworking and solid surface applications for both fixed and hand-held routers.

Router Drilling & Boring Bits

Blum's Mini-Press and Mini-Drill make short work of repetitive, time consuming hinge placement.

	Forstner Pattern Bits Drill pocket holes, flat-bottom holes, etc., using any 3/8" or larger portable drill or stationary drill press.		Metric Boring Bits Right Hand Brad point boring bits not to be used in portable drills or hand held routers.

	Metric Boring Bits Left Hand Brad point boring bits not to be used in portable drills or hand held routers.		Through Hole V-Point Bit For drilling completely through materials. Not for use with portable drills or hand held routers.

	Adjustable Countersink "Di-Count" countersink attaches to drill sizes from 3/32" to 9/32".		Abrasive Type Plunge Bit Designed especially for fiberglass, tile and other highly abrasive surfaces.

	Bull Nose Radius Bits Shape the full edge of stair treads, window sills, table and counter edges, shelves and more.		Beading Bits Cut a quarter round shape bounded by fillets in one pass with this bit.

	Chamfer Bits Chamfer or bevel edges for decorative effect or to form miter joints.		Door Lip Assembly Round the show edge of a door or drawer front while simultaneously forming a rabbet with a tapered shoulder on the back.

	Convex Edging Bit Cuts to a shallow arc - the fingernail shape - rather than a full 180 degree roundover.		Core Box Bits Cut half-round grooves for fluted moldings, columns, millwork, and signs.

	Corner Beading Bits Produce three slightly different profiles with this bit - an edge bead with or without a fillet or a full corner bead.		Double Round Over Bit This assembly cuts a roundover on both the top and bottom edge in one pass.

	Cove and Bead Bits This bead-and-cove combines the two basic forms, separating them with a fillet.		Cove Bits The covetto form - produced by the cove bit - is one of the classic building blocks for many molding profiles.

	Keyhole Bits Form keyhole slots in plaques, picture frames and othe wall-hanging items with this plunge-cutting bit.		Corner Rounding Bits The basic edge-forming bit, it rounds an edge to a given radius.

	Dovetail Bits Amana's dovetail jigs are designed for many name brand routers.		Classical Multi-Form Bit This one bit is designed to cut more than 40 different molding patterns.

	Finger Grip Bits Produce clean, modern cabinets uninterrupted by pulls & knobs by integrating the pulls into the doors.		Finger Joint Assembly Quickly and accurately route finger joints for joining wood end to end as well as edge to edge.

	Mortising Bits For cutting shallow mortises for hinges and locksets.		Moulding Bits For producing a double quarter round profile.

	45° Lock Mitre Bit Designed for routing architectural and furniture moldings and trim.		Leaf Edge Beading Bit Two passes with this bit form a delicate leaf shaped corner bead.

	Classical Ogee Bits The positions of the bead and the cove are reversed on this series of bits, with the bead coming off the bearing.		Ogee Fillet Bits This ogee pattern has a step at the end of the concave portion of the curve.

	Ogee Bits The basic ogee is an S-shaped curve, convex at the top and fairing down into a concave.		Roman Ogee Bits This bit, which has a convex curve coming off the bearing, produces the reverse of the ogee.

	Double Roman Ogee Bits The reverse cove-and-bead bit, which has the cove coming off the bearing.		Panel Pilot Bits The ideal laminate trimming bit for high volume production. This model has a short pilot for dado trimming.

	Raised Panel Bits Produces a raised panel for cabinet doors, frame-and-panel furniture, and architectural paneling.		Quadraset Adjustable Slotting Assembly An adjustable slotting assembly that includes 4 two-wing cutters, a shank arbor with pilot bearing, and spacers, washers, and shims.

	Slotting Cutter Bits Used to groove edges for T-mouldings, splines or biscuits, and other purposes.		Slotting Cutter Individual cutters. Use a two-wing for faster feed rates and a three-wing for better cut finish.

	Classical Stile and Rail Bit Cut both the rails and the stiles with a single economical assembly.		Spiral Flute Plunge Bits These produce a shearing action in cutting with an augering action in chip clearance.

	Stagger Tooth Plunge Cutting Bits Two cutting edges spaced 180 degrees apart, each half the length of its flute.		Wavy Edge Bit This bit produces an undulating curve with two convex forms flanking a concave form.

	Ogee Stile and Rail Bit Cut both the rails and the stiles with a single economical assembly.		V Groove Bit Cut decorative "V" grooves and lettering on signs with these bits.

	Table Edge Bit Cuts a wide profile with an arc based on the ellipse rather than the circle.		Tongue and Groove Bit Cut perfectly fitted tongue-and-groove joints with a table mounted router and this assembly.

	Bevel Trim Bits This is a steel-bodied, carbide tipped bit for bevel trimming laminate with a standard router.		Double Bevel Trim Bit Trim both edges of a countertop in a single pass with this assembly.

	Combination Bevel and Flush Trim Bit With this one bit, you can cut, trim, and bevel your edges.		Flush Trim Bits A variety of bits for laminate work or for template and pattern work.

	Flush Trim Plunge Bits Essentially a plunge-cutting straight with a shank-mounted ball bearing pilot.		Straight Plunge Single Flute A single flute bit to be used when cut speed is more important than cut finish..

	Indexable Flush and Bevel Trim Bits In a production environment, insert tooling reduces downtime to a minimum.		Flush Trim V Groove Bit Trim the edges of face frames flush with cabinet sides with this bit.

	Hole and Flush Cut Trim Bit This bit is used where laminate is applied over precut openings in the substrate.		Panel Pilot Trim Bits The ideal laminate trimming bit for high volume production.

	Overhang Trim Bits Used to stage flush trimming cuts, whether in laminate work or template work.		Trim Cutter An assembly offers the option of switching cutters without removing the bit from the router.

	Helix Laminate Trim Bit These have a spiral-like twist to the cutting edges making them especially good on difficult materials such as melamine.		2-1/2" Straight Plunge Double Flute Use a two-flute bit where te finish is paramount.

	2-1/4" Straight Plunge Double Flute A two flute bit that delivers two cuts per revolution for a smooth surface.		Rabbeting Bits The basic rabbeting bit cuts 3/8" wide and up to 1/2" deep.

	Ball End Router Bits Cut channels for pipes or cables using the ball end bit. The profile requires the cut to be made in a single pass.		3 Piece Tambour Door Router Bit Set Lonnie Bird’s Tambour / Appliance Garage Door Bits - requires no cloth or wires.